HP Designjet Error Codes
The searchable error code library below will help you identify the error code on your printer and find the solution for your Designjet printer. Please don't hesitate to reach out to us if you have any issues.
| Error Code | Printer Family | Meaning | Open |
|---|---|---|---|
| 61:04 | HP DesignJet 500 / 510 / 800 | Error 61:04 on HP DesignJet 500/510/800 indicates Firmware Error. The source places this code in the Job / File Processing area. | View fix |
| 61:04.1 | HP DesignJet T / Z Series | Error 61:04.1 on HP DesignJet T/Z indicates The PostScript fonts seem to be missing. The source places this code in the Job / File… | View fix |
| 61:05 | HP DesignJet 500 / 510 / 800 | Error 61:05 is a job-processing error. In the source material it applies to DesignJet 800 models, and to DesignJet 500 models equipped with an… | View fix |
| 61:08.1 | HP DesignJet T / Z Series | Error 61:08.1 on HP DesignJet T/Z indicates The file cannot be printed because it is password protected. The source places this code in the… | View fix |
| 61:YZ | HP DesignJet T / Z Series | Error 61:YZ on HP DesignJet T/Z indicates The file format is incorrect or not supported for the current product configuration and the product cannot… | View fix |
| 63:01 | HP DesignJet T / Z Series | Error 63:01 on HP DesignJet T/Z indicates Cannot retrieve IP address. The source places this code in the Network area. | View fix |
| 63:YZ | HP DesignJet T / Z Series | Error 63:YZ on HP DesignJet T/Z indicates Input/Output problem through the network interface of the formatter. The source places this code in the Network… | View fix |
| 64:04 | HP DesignJet 500 / 510 / 800 | Error 64:04 on HP DesignJet 500/510/800 indicates Firmware Error (USB Port). The source places this code in the USB / External Disk area. | View fix |
| 64:YZ | HP DesignJet T / Z Series | Error 64:YZ on HP DesignJet T/Z indicates Input/Output problem through the USB Port. The source places this code in the USB / External Disk… | View fix |
| 64.1:YZ | HP DesignJet T / Z Series | Error 64.1:YZ on HP DesignJet T/Z indicates The External Hard Disk accessory does not seem to be connected. The source places this code in… | View fix |
| 65:YZ | HP DesignJet T / Z Series | Error 65:YZ on HP DesignJet T/Z indicates Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error, communications error. The source places this… | View fix |
| 68:YZ | HP DesignJet T / Z Series | Error 68:YZ on HP DesignJet T/Z indicates Loss of engine counters tracking. The source places this code in the Counters area. | View fix |
| 71:03 | HP DesignJet T / Z Series | Error 71:03 on HP DesignJet T/Z indicates Out of Memory. The source places this code in the Memory area. | View fix |
| 71:04 | HP DesignJet T / Z Series | Error 71:04 on HP DesignJet T/Z indicates Out of Memory. The source places this code in the Memory area. | View fix |
| 71:04 | HP DesignJet 500 / 510 / 800 | Error 71:04 on HP DesignJet 500/510/800 indicates Problem allocating Memory. This Error Code only appears in HP DesignJets 800 Series, or in the HP… | View fix |
| 71:06 | HP DesignJet 500 / 510 / 800 | Error 71:06 on HP DesignJet 500/510/800 indicates Out of Memory problem. This Error Code only appears in HP DesignJets 800 Series, or in the… | View fix |
| 72:04 | HP DesignJet 500 / 510 / 800 | Error 72:04 on HP DesignJet 500/510/800 indicates Problem in the Scan-Axis (Firmware Error). The source places this code in the Firmware / Calibration area. | View fix |
| 72.02:09 | HP DesignJet T / Z Series | Error 72.02:09 on HP DesignJet T/Z indicates Generic firmware Error. The source places this code in the Firmware / Calibration area. | View fix |
| 72.02:YZ | HP DesignJet T / Z Series | Error 72.02:YZ on HP DesignJet T/Z indicates A Service Callibration should be performed. The source places this code in the Firmware / Calibration area. | View fix |
| 73:04 | HP DesignJet 500 / 510 / 800 | Error 73:04 on HP DesignJet 500/510/800 indicates Servo Error. The source places this code in the Servo area. | View fix |
| 74:YZ | HP DesignJet T / Z Series | For HP DesignJet T/Z, error 74:YZ is associated with this condition: Error uploading firmware update file. The source places this code in the Firmware… | View fix |
| 74.08:04 | HP DesignJet T / Z Series | Error 74.08:04 on HP DesignJet T/Z indicates Problem with the Firmware upgrade process. The source places this code in the Firmware / Paper Profiles… | View fix |
| 74.1:YZ | HP DesignJet T / Z Series | For HP DesignJet T/Z, error 74.1:YZ is associated with this condition: Error uploading paper profile update file. The source places this code in the… | View fix |
| 75.21:YZ | HP DesignJet T / Z Series | Error 75.21:YZ on HP DesignJet T/Z indicates The Spitoons (Left Spitton, Service Station) have reached 80% capacity. The source places this code in the… | View fix |
| 75.22:YZ | HP DesignJet T / Z Series | Error 75.22:YZ on HP DesignJet T/Z indicates The Spitoons (Left Spitton, Service Station) are full. The source places this code in the Maintenance /… | View fix |
| 76:YZ | HP DesignJet T / Z Series | Error 76:YZ on HP DesignJet T/Z indicates Hard Disk drive is full. The source places this code in the Hard Disk area. | View fix |
| 78:08 | HP DesignJet T / Z Series | Error 78:08 on HP DesignJet T/Z indicates The job received can not be printed without borders on this paper. The source places this code… | View fix |
| 78.1:YZ | HP DesignJet T / Z Series | Error 78.1:YZ on HP DesignJet T/Z indicates Media settings area missing in media settings file. The source places this code in the Media Settings… | View fix |
| 79:04 | HP DesignJet 500 / 510 / 800 | Error 79:04 is a generic firmware error on these HP DesignJet models. The source recommends a full power restart and checking that the printer… | View fix |
| 79:YZ | HP DesignJet T / Z Series | Error 79:YZ on HP DesignJet T/Z indicates Generic Firmware error. The source places this code in the Firmware area. | View fix |
| 81:01 | HP DesignJet 500 / 510 / 800 | Error 81:01 is a paper-axis or paper-servo shutdown. The source says it is usually associated with a paper jam or blockage in the paper-axis… | View fix |
| 81:01 | HP DesignJet T / Z Series | Error 81:01 on HP DesignJet T/Z indicates Paper axis error - the copier will restart and run a diagnostic test. The source places this… | View fix |
| 81:11 | HP DesignJet 500 / 510 / 800 | Error 81:11 on HP DesignJet 500/510/800 indicates Paper-Axis shutdown (during the Paper Advance test). The source places this code in the Paper Axis /… | View fix |
| 81:YZ | HP DesignJet T / Z Series | Error 81:YZ on HP DesignJet T/Z indicates This Error can occur if the product has been dropped during transportation causing structural damage. The source… | View fix |
| 85:10 | HP DesignJet 500 / 510 / 800 | Error 85:10 on HP DesignJet 500/510/800 indicates Paper-Axis Encoder error. The Drive Roller Encoder Sensor cannot find the zero position of the Encoder Disk.… | View fix |
| 86:01 | HP DesignJet 500 / 510 / 800 | Error 86:01 means the printer detected that the carriage could not move correctly along the scan axis. The source material points first to a… | View fix |
| 86:01 | HP DesignJet T / Z Series | Error 86:01 indicates a scan-axis or carriage shutdown because the carriage is not moving as expected. The source identifies a paper jam or obstruction… | View fix |
| 86:11 | HP DesignJet 500 / 510 / 800 | Error 86:11 means the printer measured the scan-axis movement as too short. The source directs the user to inspect the carriage path for anything… | View fix |
| 86:11 | HP DesignJet T / Z Series | Error 86:11 means the printer detected that scan-axis movement requires too much force or energy. The source record does not provide a customer corrective… | View fix |
| 86:13 | HP DesignJet 500 / 510 / 800 | Error 86:13 on HP DesignJet 500/510/800 indicates Carriage-Axis shutdown (Firmware Error). The source places this code in the Carriage / Scan Axis area. | View fix |
| 87:01 | HP DesignJet T / Z Series | Error 87:01 on HP DesignJet T/Z indicates Problem finding the Scan-axis encoder reading. The source places this code in the Carriage Encoder area. | View fix |
| 87:13 | HP DesignJet 500 / 510 / 800 | Error 87:13 on HP DesignJet 500/510/800 indicates Unable to read the Carriage Encoder Sensor. The source places this code in the Carriage Encoder area. | View fix |
| 87:YZ | HP DesignJet T / Z Series | Error 87:YZ on HP DesignJet T/Z indicates Problem finding the Scan-axis/Carriage sensor encoder reading. The source places this code in the Carriage Encoder area. | View fix |
| 8XXX-XXXX | HP DesignJet T850 / T950 | Error 8XXX-XXXX on HP DesignJet T850/T950 indicates Internal FW error. Make sure that the printer firmware version is up to date and. The source… | View fix |
| 93:10 | HP DesignJet 500 / 510 / 800 | Error 93:10 on HP DesignJet 500/510/800 indicates Ink System startup failed. The source places this code in the Ink Delivery System area. | View fix |
| 93:YZ | HP DesignJet T / Z Series | Error 93:YZ on HP DesignJet T/Z indicates Unable to pressurize the Ink Delivery System. The ISS Motor does not move as expected. The source… | View fix |
| F0.01.01.01 | HP DesignJet T850 / T950 | Error F0.01.01.01 on HP DesignJet T850/T950 indicates Internal FW error. Make sure that the printer firmware version is up to date and. The source… | View fix |
| F0.01.01.02 | HP DesignJet T850 / T950 | Error F0.01.01.02 on HP DesignJet T850/T950 indicates Internal FW error. Make sure that the printer firmware version is up to date and. The source… | View fix |
| F0.01.01.04 | HP DesignJet T850 / T950 | Error F0.01.01.04 on HP DesignJet T850/T950 indicates Internal FW error. Make sure that the printer firmware version is up to date and. The source… | View fix |
| F0.01.01.06 | HP DesignJet T850 / T950 | Error F0.01.01.06 on HP DesignJet T850/T950 indicates Make sure that the printer firmware version is up to date and. The source places this code… | View fix |
| F0.01.01.07 | HP DesignJet T850 / T950 | Error F0.01.01.07 on HP DesignJet T850/T950 indicates Internal FW error. Make sure that the printer firmware version is up to date and. The source… | View fix |
| F0.01.03.01 | HP DesignJet T850 / T950 | Error F0.01.03.01 on HP DesignJet T850/T950 indicates Make sure that the printer firmware version is up to date and. The source places this code… | View fix |
| F0.01.03.04 | HP DesignJet T850 / T950 | Error F0.01.03.04 on HP DesignJet T850/T950 indicates Make sure that the printer firmware version is up to date and. The source places this code… | View fix |
| F0.01.04.03 | HP DesignJet T850 / T950 | Error F0.01.04.03 on HP DesignJet T850/T950 indicates Make sure that the printer firmware version is up to date and. The source places this code… | View fix |
| F0.01.04.07 | HP DesignJet T850 / T950 | Error F0.01.04.07 on HP DesignJet T850/T950 indicates Internal FW error. Make sure that the printer firmware version is up to date and. The source… | View fix |