DesignJet Z2100, Z3100 & Z3200 error codes

  • 01.0 – Main PCA/Electronics module
  • 01.1 – Add-on Electronics module (printmech)
  • 01.2 – Print Mech PCA
  • 01.3 – Right Ink Supply Station
  • 02.1 – Carriage PCA
  • 03 – Power supply
  • 06 – Formatter
  • 08 – Formatter, Front panel
  • 11 – Trailing cable
  • 21 – Service station
  • 21.1 – Service station
  • 22.0 – Bongo error BPS0 (ISS Left)
  • 22.1 – Bongo error BPS1 (ISS Left)
  • 22.2 – Bongo error BPS2 (ISS Right)
  • 22.3 – Bongo error BPS3 (ISS Right)
  • 24 – Tube assembly (IDS)
  • 26.n – Ink Cartridge (color = n)
  • 27 – Printhead error
  • 31 – Cutter
  • 38 – Output Tray
  • 41 – Paper-axis motor
  • 41.1 – Paper-axis motor
  • 42 – Scan-axis motor
  • 44 – Aerosol fan
  • 47 – Star wheel motor
  • 48 – PPS mechanism
  • 51 – Window Sensor
  • 52 – Drop detector
  • 55 – Line sensor
  • 56 – Drive roller analog encoder sensor
  • 58 – Color sensor (ESP)
  • 61 – Error job
  • 62 – PC Interface
  • 63 – Input/output through LAN card
  • 64 – Input/output through USB port
  • 65 – Input/output (not known what port)
  • 66 – Input/output (not known what port)
  • 67 – Input/output through FireWire port
  • 68 – Loss of engine counters tracking
  • 71 – Memory management
  • 71.19 – PrintMech PCA/Formatter
  • 72 – Firmware error
  • 73 – Servo
  • 74 – Firmware upgrade
  • 74.1 – Media Profile Update
  • 75.1 – Preventive Maintenance kit #1
  • 75.2 – Preventive Maintenance kit #2
  • 75.3 – Preventive Maintenance kit #3
  • 76 – Disk Full
  • 77 – Web access application
  • 78 – Borderless
  • 78.1 – Media Settings
  • 79 – Assertion (uncontrolled FW error)
  • 79.1 – Recoverable Firmware Error
  • 81 – Media advance
  • 81.1 – Media advance
  • 84 – Roll Feed
  • 85 – Media-axis encoder reading
  • 86 – Carriage Movement
  • 87 – Scan-axis encoder reading
  • 93 – Ink Pumping
  • 94 – Color calibration
  • 94.1 – Profiler
  • 95 – Printhead alignment
  • 97 – Paper advance calibration
Message us now